Sapphire Metallic - The Ultimate Metallic Paint

Application

Surface Preparation – All surfaces must be clean and free of dust, dirt, and oils. Make sure the  surface is completely smooth, dull, and free of loose or flaking paint. Sapphire Metallic will not stick to shiny surfaces including vinyl, glass, and semi-gloss/gloss surfaces. Prepare the substrate with the recommended tinted primer over the previously painted surfaces or basecoat.

Application Methods – Sapphire Metallic can be applied with a brush, roller, or HVLP/airless sprayer. Use only high-quality tools with metallic paints. When using a roller or brush, apply quickly in one direction, from joint to joint, keeping a wet edge while working. A strié effect may be created by applying with a brush in vertical or horizontal fashion. A roller may be used in a random pattern to create a unique finish as well. Other decorative painting tools and techniques may be used to create your desired results. It is important to note that a uniform finish is not achievable with metallic paints if rolled or brushed on like standard acrylic paints. For a uniform finish with no brush textures, we recommend a spray application. Apply only during temperate conditions: 50° to 90°F and between 25% and 75% relative humidity. Higher temperatures and lower humidity may cause the paint to lose its wet edge.

Spray Instructions – To spray Sapphire Metallic, use a Turbine powered HVLP or Conventional cup gun (airless is not recommended). Dilute with up to 10% water, approximately 12 fl. oz. of distilled water to one gallon of paint. It is recommended to use a needle size between #2-3. Recommended air pressure at the spray gun, approximately 25-35psi, with greater pressure at the tank, approximately 75-90psi. Use a NIOSH approved respirator when spraying in an adequately ventilated area. If applied too heavily, pooling and dripping may occur. Regularly stir the paint while working. Two or more coats are usually required to obtain the desired look.

Exterior Application – It is recommended to protect the finish with Meoded Cristallo Clear Coat for exterior applications or any high traffic areas. Two coats will usually provide adequate protection, while three coats are recommended for high traffic areas.